Rangecraft Rangehoods are the new paradigm in rangehood technology.

Using state-of-the-art plasma technology, Rangecraft Rangehoods will clean the air like no other recirculating rangehood on the Australian market.

More Info Icon - arrow down

Plasma technology originates from the need for air purification in the space and military industries and has been extensively used to eliminate odours in commercial kitchen settings and food processing industries.

Rangecraft Rangehoods has now adapted this powerful plasma technology for use in domestic recirculating rangehoods on the Australian market resulting in a rangehood that does not require ducting, but delivers superior quality clean air.

Additional Features Below

Additional information

Download Brochure


The rangehood removes by-products of cooking – grease / odours / steam / heat with three phases of air purification.

Phase 1

Particle / Grease filter – grease extraction and dehumidification of cooking vapours by stainless steel mesh filters.

Phase 2

Plasma treatment of pre-purified air – odour and scent molecule chains pass through an electrified plasma environment and undergo cold combustion.

The molecules are disintegrated and oxidised through a plasma chemical reaction and converted into oxygen, carbon dioxide and water.

Phase 3

Three layered charcoal filter – Odour molecules not captured in Phase 2 will be absorbed by the activated charcoal filter.


Rangecraft Rangehoods are an excellent choice for apartment living or heritage listed housing where ducting can be a problem.

Rangecraft Rangehoods motors are made in Germany and have the following airflow ratings:

  • 750m3/hr on high speed
  • 150m3/hr on low speed

Rangecraft Rangehoods are

  • Suitable for all standard electric, gas and induction hotplates.
  • Not suitable for indoor barbecues, high speed gas burners or hotplates with megajoule rating of >40mj.




The plasma unit can be installed directly on top of the rangehood motorbox or, if there is insufficient space, ducted up to 6 meters away.

Condari recommends using 150mm round, solid, non-flammable ducting for Rangecraft Rangehoods.

It is important that return air comes back into the same room via an air outlet at least 400 cm2.


Other Features:

  • Made from type 304, non-magnetic brushed stainless steel.
  • Energy saving LED strip lighting.  Some models are equipped with a nightlight.
  • Dishwasher safe, stainless steel mesh filters
  • Canopies are manufactured to client specified heights to avoid unsightly joins in the steel.


Warranty and Maintenance:

All Rangecraft Rangehoods come with a 3 year manufacturers’ warranty which is extended to a total of 5 years when an Approved Installer installs the rangehood.

The carbon filter must be replaced approximately every 5 years by a Condari Approved Service Agent. Please note, the carbon filter may need replacing before 5 years depending on the style of cooking and how often the rangehood is used.  


Custom Made / Special Rangehoods

Are you looking for something out of the ordinary?  Condari specialises in manufacturing custom designed / special residential rangehoods.

Condari will customise a Rangecraft Plasma Rangehood, specific to your style, cooker, cooking requirements and cabinetry. It will be manufactured in Melbourne, Australia in our factory in Ringwood.

If you are interested in the possibilities of a custom designed Rangecraft Rangehood, please speak with a Condari retailer or call the office in your state to speak with one of our friendly staff.